Production of thermoelectric modules
  • russian
  • english
  • home
  • mail
  • map
Rambler's Top100

Two section thermoelectric coolers

Two section thermoelectric coolers

 

Designs of two section thermoelectric coolers

An universal abbreviation is used to notate single-stage coolers: ТВ-N-C-h, where:

ТВ — product abbreviation— thermoelectric battery (cooler);

N — number of thermocouples in the cooler;

С — length of the rib of the thermoelectric element basis (in millimeters);

h — height of the thermoelectric element (in millimeters)

For example, in the module TB-161-1,4-1,5: 161 thermocouples (322 thermoelectric elements), every element has the cross-section of 1,4x1,4 mm and is 1,5 mm high.

STANDARD TERMS OF DELIVERY

ADDITIONAL OPTIONS

Please do not hesitate to contact us if you have any further questions.
Phone:+7 (812) 394 13 10, E-mail: info@kryotherm.ru

Parameters Imax, Qmax, Umax, dTmax - are given at Th=300K.

NameImax
(A)
Qmax
(W)
Umax
(V)
dTmax
(K)
R
(Ohm)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
H
(mm)
TB-254-1,0-2,5 (TURBO-2,5)Serial 1,85 36,6 31,8 70 12,20 40,0 40,0 40,0 40,0 4,8
TB-254-1,0-2,5 (TURBO-2,5)Parallel 3,70 36,6 15,9 70 3,10 40,0 40,0 40,0 40,0 4,8
TB-254-1,0-1,5 (TURBO-1,5)Serial 3,10 60,0 31,4 69 7,50 40,0 40,0 40,0 40,0 3,8
TB-254-1,0-1,5 (TURBO-1,5)Parallel 6,20 60,0 15,7 69 1,85 40,0 40,0 40,0 40,0 3,8
TB-254-1,0-1,3 (TURBO-1,3)Serial 3,60 69,0 31,4 69 6,50 40,0 40,0 40,0 40,0 3,6
TB-254-1,0-1,3 (TURBO-1,3)Parallel 7,20 69,0 15,7 69 1,60 40,0 40,0 40,0 40,0 3,6

STANDARD TERMS OF DELIVERY

  • substrate material — alumina (ВК-96)
  • height tolerance ± 0.05 mm (L1)
  • parallelism 0.03 mm (L1)
  • flatness 0.02 mm (L1)
  • wire length 120 mm
  • pin orientation (for rectangular coolers) — to the longer side
  • operating temperature up to 80°С, maximal assembly temperature 120°С (assembly solder Tm = 139°С)

ADDITIONAL OPTIONS

DescriptionNotation (*)Note
operating temperature up to 120 °C, max assembly temperature = 130 °C** HT(120) assembly solder with Tm = 139 °C 
operating temperature up to 150 °C, max assembly temperature = 170 °C** HT(150)*** assembly solder Pb-Sn with Tm = 183 °C*** 
operating temperature up to 200 °C, max assembly temperature = 220 °C**  HT(200) assembly solder with Tm = 232 °C
special version for operation under conditions of temperature cycling  С > 105 cycles +40C/+90 °C
height tolerance = ± 0.025 mm;
parallelism 0.02 mm;
flatness 0.015 mm.
L2  
height tolerance = ± 0.015 mm;
parallelism 0.01 mm;
flatness 0.01 mm.
L3  
metallization of cold (mc) and (or) hot side of cooler with solder tinning (melting temperature = 95 °C, 117 °C, 139 °C, 183 °C) mc95, mh95, mm117 etc.  
gold plating At request  
substrate material – aluminium nitride (AlN) N heat conductivity > 180 W/mK
sealant: epoxy, silicon E, S  
non-standard pin orientation    
type and length of wires by customer’s requirement    
assembling into arrays      
сonnectors crimping    
soldering on cold or hot heatsink, packaging or cold block    

(*) - the notations shown are used to notate additional options in cooler name;
(**) - the maximum assembly temperature influence on the module must not exceed 2 minutes;
(***) - Important! TEС with this option does not satisfy ROHS requirements.

Examples:

1. FROST-72 HT (150)- thermoelectric cooler FROST-72, with max operating temperature = 150 °С, with substrate material of aluminium oxide.