Production of thermoelectric modules
  • russian
  • english
  • home
  • mail
  • map
Rambler's Top100

4-stage thermoelectric coolers

4-stage thermoelectric module, Peltier elements

 

Designs of 4-stage thermoelectric modules

System of notation: 
An universal abbreviation is used to notate multi-stage coolers: ТВ-n-(N1-N2-N3-N4)-h, where:
ТВ — product abbreviation — thermoelectric battery (cooler); 
n — number of stages in the cooler; 
N1 — N4 — number of thermocouples in the first, second, third and forth stages of the thermoelectric cooler;
 h — height of the thermoelectric element in the bottom stage (in millimeters);
(N1-N2) is used for two-stage coolers, (N1-N2-N3) — for three-stage coolers and (N1-N2-N3-N4) — for four-stage coolers. 
For example, in the cooler TB-2-(11-4)-1.0: 2 stages, 11 couples in the first stage, 4 couples in the second stage, the height of the elements in the bottom stage is 1,0 mm.

STANDARD TERMS OF DELIVERY

ADDITIONAL OPTIONS

Please do not hesitate to contact us if you have any further questions.
Phone:+7 (812) 394 13 10, E-mail: info@kryotherm.ru

Parameters Imax, Qmax, Umax, dTmax - are given at Th=300K.

NameImax
(A)
Qmax
(W)
Umax
(V)
dTmax
(K)
R
(Ohm)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
H
(mm)
Design
TB-4-(59-31-11-4)-1,5 0,8 0,4 6,9 118 8,90 12,0 12,0 4,0 2,0 12,2 1
TB-4-(59-31-11-4)-1,2 1,0 0,5 6,9 117 7,15 12,0 12,0 4,0 2,0 11,0 1
TB-4-(59-31-11-4)-1,0 1,1 0,6 6,9 116 5,95 12,0 12,0 4,0 2,0 10,2 1
TB-4-(83-18-4-1)-1,3 3,7 0,8 10,0 138 2,37 24,0 20,6 2,4 4,5 13,6 2
TB-4-(127-71-31-17)-1,65 6,8 14,8 14,1 107 2,05 48,0 48,0 22,0 22,0 15,0 1
TB-4-(127-71-31-17)-1,5 3,0 6,8 15,5 111 3,45 40,0 40,0 15,0 15,0 13,7 1
TB-4-(199-97-49-17)-1,5 6,7 16,9 23,6 111 3,45 62,0 62,0 20,0 20,0 14,5 1

STANDARD TERMS OF DELIVERY

  • substrate material — alumina (ВК-96)
  • height tolerance ± 0.35 mm
  • parallelism 0.15 mm (L4)
  • flatness 0.1 mm (L4)
  • pin orientation (for rectangular coolers) — to the longer side
  • operating temperature up to 80°С, maximal assembly temperature 120°С (assembly solder Tm = 139°С)

ADDITIONAL OPTIONS

DescriptionNotation (*)Note
operating temperature up to 120°C, max assembly temperature = 130°C**  HT(120) assembly solder with Tm = 139°C 
operating temperature up to 150°C, max assembly temperature = 170°C**  HT(150)*** assembly solder Pb-Sn with Tm = 183°C*** 
height tolerance = ± 0.05 mm;
parallelism 0.03 mm;
flatness 0.02 mm.
L1  
height tolerance = ± 0.025 mm;
paral lelism 0.02 mm;
flatness 0.015 mm.
L2  
metallization of cold (mc) and (or) hot side of cooler with solder tinning (melting temperature = 95°C, 117°C, 139°C, 183°C) mc95, mh95, mm117 etc.  
gold plating At request  
substrate material – aluminium nitride (AlN) N heat conductivity > 180 W/mK
sealant: epoxy, silicon E, S  
non-standard pin orientation    
type and length of wires by customer’s requirement    
non-standard height of coolers    
soldering on cold or hot heatsink, packaging or cold block    

(*) - the notations shown are used to notate additional options in cooler name;
(**) - the maximum assembly temperature influence on the module must not exceed 2 minutes;
(***) - Important! TEС with this option does not satisfy ROHS requirements.